LVS+Keepalived+MysqlCluster搭建高可用的Mysql系统(实测可行)

LVS+Keepalived+MysqlCluster搭建高可用的Mysql系统(实测可行)

环境

• CentOS7.0
  -mysql-cluster-gpl-7.1.9a-linux-i686-glibc23.tar.gz
• keepalived-1.4.2.tar.gz

方案

安装MysqlCluster

在此不再赘述，安装详情见我的上一篇文章MysqlCluster安装实测可行

安装keepalived

安装必要的插件(官网上要求的和一些必备的)

 - yum install curl gcc openssl-devel libnl3-devel net-snmp-devel
 - yum install -y libnfnetlink-devel（解决错误:configure: error: libnfnetlink headers missing）
 - yum install kernel-devel ipvsadm -y

安装

• 上传文件到/etc/local/,解压
• tar -zxvf keepalived-1.4.2.tar.gz
• cd keepalived-1.4.2
• ./configure –prefix=/usr/local/keepalived(prefix：指定安装目录）
• make
• make install
  -完成以上步骤 ，安装就完成了，目录结构如下：
  

配置MASTER和BACKUP

• 在 /etc/keepalived创建keepalived.conf，文件内容如下：

global_defs {
    router_id LVS_DEVEL
}
vrrp_instance VI_MYSQL_1 {
        state MASTER //(备机：BACKUP)
        interface ens33
        virtual_router_id 55
        priority 150 //(备机:100）
        advert_int 5
        authentication {
                auth_type PASS
                auth_pass 010203
        }
        virtual_ipaddress {
                192.168.1.200
        }
}
virtual_server 192.168.1.200 3306 {
        delay_loop 6
        lb_algo rr
        lb_kind DR
        persistence_timeout 6
        protocol TCP

        real_server 192.168.1.2 3306 {
                weight 1
                TCP_CHECK {
                        connect_timeout 3
                        nb_get_retry 3
                        delay_before_retry 3
                        connect_port 3306
                }
        }
        real_server 192.168.1.3 3306 {
                weight 1
                TCP_CHECK {
                        connect_timeout 3
                        nb_get_retry 3
                        delay_before_retry 3
                        connect_port 3306
                }
        }
        real_server 192.168.1.4 3306 {
                weight 1
                TCP_CHECK {
                        connect_timeout 3
                        nb_get_retry 3
                        delay_before_retry 3
                        connect_port 3306
                }
        }CKUP
}

• 备机使用scp命令从主机拷贝

/etc/keepalived/keepalived.conf 192.168.1.14:/etc/keepalived/`

• 移动启动相关的文件

cp  /usr/local/keepalived-1.4.2/keepalived/etc/init.d/keepalived /etc/init.d/
cp /usr/local/keepalived/sbin/keepalived /usr/sbin/
cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/

配置LVS节点

（这一步至关重要，不然VIP无法跟LVS节点建立连接，keealived运行正常，但是client就是连不上VIP）

• vi /etc/rc.d/init.d/realserver.sh 文件内容如下：
  SNS_VIP=192.168.1.200设定VIP，如果你的VIP不是该ip，请修改

#!/bin/bash
# description: Config realserver lo and apply noarp
SNS_VIP=192.168.1.200

/etc/rc.d/init.d/functions

case "$1" in
start)
       ifconfig lo:0 $SNS_VIP netmask 255.255.255.255 broadcast $SNS_VIP
       /sbin/route add -host $SNS_VIP dev lo:0
       echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
       echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
       echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
       echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
       sysctl -p >/dev/null 2>&1
       echo "RealServer Start OK"

       ;;
stop)
       ifconfig lo:0 down
       route del $SNS_VIP >/dev/null 2>&1
       echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore
       echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce
       echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore
       echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce
       echo "RealServer Stoped"
       ;;
*)
       echo "Usage: $0 {start|stop}"
       exit 1
esac

exit 0

• 赋予该执行权限

1.chmod +x /etc/rc.d/init.d/functions
2.chmod +x /etc/rc.d/init.d/realserver.sh

• 启动

/etc/rc.d/init.d/realserver.sh start 

• ifconfig查看新增的虚拟ip
  

启动keepalived

• 启动项在 cd /etc/init.d
• ./keealived start
• 查看日志文件
  tail -f /var/log/message
  

• ipvsadm
  

• 连接VIP
  

• ipvsadm -lc
  

测试

• 当主机挂了，备机就会变成主机提供服务
• 当主机恢复后，备机将从主机回到备机状态
• keepalived主机会监听LVS节点，当有SQL(LVS)挂点或上线，主机会第一时间与其建立联系或者断开连接

总结

配置LVS节点至关重要，务必配置。

LVS+keepalived+MysqlCluster实现了mysql的高可用性，高扩展。单MysqlCluster是无法完成这个任务的，keepalived实现了负载均衡，从而将高可用体现了出来。